Ceramic veneers in Turkey


Installing dental veneers is mostly done to fully transform your smile. The process is only applied as a treatment in a few instances. Front teeth are more frequently covered with veneers in Turkey. They are only applied as a form of treatment for minor flaws. 

Ceramic veneers are the best among the materials that dentists use in Turkey. The only visible portion of the tooth is restored, which sets them apart from procedures involving full-fledged prostheses. Veneers are a wonderful solution for covering up grin flaws. Your smile will be entirely renewed after the surgery, undoubtedly for the better.

Table of Contents



1-3 days


From ₤200


15 years


local or local with sedation

Cost of dental treatments in Turkey

E-Max veneers – £200 per tooth

Lumineers £237 per tooth 

Inlay / Onlay ceramics £200 per tooth

Metal fused porcelain crown£120 per tooth

Zirconium crown – £135 per tooth

The most popular types of veneers in Turkey

Benefits of ceramic veneers in Turkey


The process causes very little trauma.

Approximately 0.7 mm of dental tissue must be removed from the area that will be prosthetic in order to fix the veneers. The dentist in Turkey grinds teeth on both sides in preparation for placing dental crowns. Only teeth with sound nerves can receive dental veneers. While you wear them, the aesthetics of your smile are maintained at all times.

Provide long-term service.

You can maintain complete mobility with ceramic veneers for 10 to 15 years. Additionally, porcelain veneers will survive longer than 20 years when zirconium is applied.


Veneers in Turkey are created in a way that makes it challenging to tell them apart from the natural enamel layer of the teeth.


The porcelain faithfully reproduces every aspect of the enamel.

Not harmful.

This is true since only biocompatible and hypoallergenic materials are used by manufacturers.


You won’t even be aware that you have veneers on when chewing. There won’t be any diction problems either.

Which patients need ceramic veneers?

The most popular type of dental veneers in Turkey, ceramic veneers, are utilized for complete smile renewal and, as a bonus, a minor facelift. Porcelain veneers can be used to restore any tooth. 

The following are some of the indications for the veneer procedure:

Veneer treatment process


Before starting aesthetic treatment in Turkey, the doctor excludes all the moments in which it is impossible to place ceramic veneers. In some circumstances, it is worth completely stopping the procedure:


How are dental veneers installed in Turkey?

After a thorough diagnostic and the formation of the lower jaw’s physiological posture, this occurs as a result of lifting the lower part of the face. And none of this would be possible without just veneers. 

It takes 7 to 10 days for an orthopaedic dentist in Turkey to make and install multiple ceramic overlays.



It entails turning the tooth enamel’s surface down a specific distance. There is no discomfort for patients involved in the turning process.


Today, there is no requirement for the use of impression material. A dental laboratory receives the file after the dentist uses an intraoral scanner to scan the patient’s teeth. 


A microscope is utilized in today’s dentistry labs to create extremely accurate prostheses for patients. With its aid, the dental technician can quickly and easily get the highest density of the marginal fit of the lining to the tooth, ensuring a long service life for the veneers and a beautiful smile.


The patients are invited to the clinic when the pads are prepared. Depending on how many restorations are needed for each tooth, the treatment will take between 30 and 60 minutes per tooth.

What foods may and cannot be consumed after veneers have been placed?

The front teeth’s burden should be kept to a minimum when veneers are present. In other words, let go of everything solid, as too much pressure can cause the plates to peel or break.


How to take care of veneers



Veneers demand more meticulous dental hygiene maintenance. Brushing your teeth in the morning and at night, rinsing them after each meal, and using dental floss is essential. If you currently use a hard toothbrush, you should switch to a softer one made specifically for veneers; otherwise, you can continue using your current toothbrush. 

Pay close attention to the toothpaste you use because only toothpaste with a low abrasive level will keep your veneers clean.

Using an irrigator

By using it, you improve the standard of your tooth brushing. Up to twice as much plaque can be removed by the irrigator as by a conventional toothbrush. It cleans the tongue, gum mucosa, and areas around the prosthetics that are next to the teeth in addition to their surfaces. 

The device works on the basis of the idea that liquid is supplied under pressure through a unique nozzle. The jet perfectly removes plaque while massaging the gums and promoting blood flow.

Dental checkup

Even if you are quite certain that you are giving your teeth the best possible care, schedule expert cleanings every three months and make an appointment at the dentist at least twice a year. 

Regular examinations by a licensed oral hygienist can help identify developing issues early on. It is advisable to speak with a physician with knowledge of maintaining veneers.

Veneers turning darker

Patients who recently had veneers installed may occasionally voice concerns regarding their darkening. There are various approaches to troubleshooting this issue.

When it comes to composite veneers, they sometimes dramatically darken. Since the plates are not bleachable, you will need to totally replace them if this occurs. 

Veneers made of porcelain may also darken. Additionally, the ceramic itself does not change colour; rather, the darkening is caused by the de-cementing of the prosthesis and the development of minute crevices, into which food pigment is absorbed. The dentist needs to determine why this occurrence is developing the way it is. 

Rarely is it possible to remove the veneer while keeping it intact? The majority of the time, a new design needs to be manufactured and installed.


No comment yet, add your voice below!

Add a Comment

Your email address will not be published. Required fields are marked *